Dealing with a plumbing issue can be a real headache. A leaky faucet might seem like a minor inconvenience, but a burst pipe can quickly turn into a major disaster causing water damage and disrupting your entire home. The good news is that finding a trustworthy plumber in Boulder, Colorado doesn’t have to add to the stress.
The most recommended plumbers in Boulder
Planet Plumbing & Drain
Roto-Rooter Plumbing & Water Cleanup
King Rooter & Plumbing
Top 10 Common Plumbing Problems in Boulder, Colorado
Frozen Pipes
- Causes: Besides frigid temperatures, poorly insulated pipes in crawlspaces, basements, attics, or exterior walls are susceptible to freezing.
- Solution (beyond the ones mentioned earlier): If a pipe bursts, shut off the main water supply immediately. Locate the break and place a bucket or pan underneath to catch dripping water. Call a licensed plumber to assess the damage and repair the pipe.
- Prevention: In addition to insulation, consider wrapping exposed pipes with heat tape during extreme cold spells. Seal air leaks around pipes using caulk to prevent cold air from reaching them.
Low Water Pressure
- Causes: Apart from clogged pipes and leaks, a partially closed shut-off valve, pressure regulator problems, or issues with the city’s water main can contribute to low water pressure.
- Solution: If cleaning aerators and checking for leaks don’t solve the problem, check the shut-off valve under your sink and ensure it’s fully open. For pressure regulator issues or concerns about the city’s main line, contact a plumber or your local water utility company.
Clogged Drains
- Causes: While hair, soap scum, and food scraps are common culprits, mineral buildup, grease buildup, or even foreign objects accidentally flushed can cause drain clogs.
- Solution: For stubborn clogs that a drain snake or plunger can’t handle, consider using a commercial drain cleaner, but be cautious and follow the instructions carefully. Prevention: Develop habits like placing drain traps in sinks and tubs to catch hair, avoiding pouring grease down the drain, and disposing of food scraps properly in the trash.
Running Toilets
- Causes: A worn flapper valve, a faulty fill valve, or a mineral build-up on the toilet tank components can cause a toilet to run continuously.
- Solution: Replacing the flapper valve or adjusting the fill valve are often DIY fixes. If the problem persists or you suspect mineral buildup, consult a plumber for a more thorough inspection and cleaning.
Leaky Faucets
- Causes: Apart from worn O-rings and loose connections, faulty cartridges or damaged faucet bodies can also lead to leaky faucets.
- Solution: Replacing O-rings and tightening loose connections are relatively simple tasks. However, replacing a cartridge or repairing a damaged faucet body might require a plumber’s expertise.